People with fences in their gardens told ‘act now’ before time runs out
Numerous property owners believe that the application of fence treatment is simple, but small mistakes can cause peeling, decay and irregular coatings. Even the most robust fencing can be sensitive if it is not prepared correctly and is not treated.
With the appropriate method, your garden timber is durable, attractive and protected from elements in the coming years. Reading from Jack External Paint Experts to help homeowners success Emperor paint It has revealed the most common mistakes made when treating fences.
Jack said: “I urged the British to take action to protect unrelated fences in a waterproof manner. This will help prevent your fences from being damaged by more wet autumn and winter air.”
Avoid when treating a fence
Neglect to clean the dirt
The facing this significant preparation phase may prevent your fence treatment from penetration and decrease in the timber. In the garden timber, it accumulates dirt, algae and organic matter that should be eliminated before any treatment.
Important dirt can be cleaned by using a pressure washer; For less dirty fencing, hot soapy water and a soft brush will be enough. In old wood, light sanding with 180 grit sanding paper helps to reveal the original surface of the timber.
Neglecting fungicital cleaner application
If the mold, algae and mold are not treated, it can linger in your fence and take the dark patches under your waterproofing. Using a mushroom lethal cleaner allows the elimination of any organic growth on the timber, which has been exposed to elements for more than a year before applying your treatment. Apply this using a brush, cylinder or sprayer and allow to dry for at least two hours.
Neglecting to protect the surrounding areas
Excessive spraying or dripping can damage the vendal, plants and garden furniture. Protect the nearby surfaces using masking tape on the edges such as fence poles.
Jump out of a test area
Each wooden surface is slightly different and some treatments can change the appearance of wood more than expected. Testing a small, hidden area allows you to obtain the desired coating first.
Treatment when timber is damp or when the rain is close
Wood must be completely dry before any treatment is applied, because the moisture in the wood or the rain can prevent the absorption of moisture absorption and endanger the surface. Always check the moisture content of your fence and local weather forecast before it starts.
Use wrong tools
Using a small brush can even make it difficult and slow the process. For optimal results, use 3 “brush, mid -weight cylinder or a hand pump sprayer to apply waterproofing.
Excessive application or inadequate application
While insufficient treatment remains vulnerable in the timber, the excessive application can cause an irregular coating. For example, the emperor requires a single coat in 5m2 per liter for optimum protection.
Facing long -term care
A large number of wooden treatment requires re -application every two to three years. Investing in a highest quality waterproof, guaranteeing protection for at least 25 years without maintenance, minimizes long -term discomfort.
