California State University, Dominguez Hills reduces water and maintenance costs with faucet standardization

California State University, Dominguez Hills has adopted a standard approach to toilet sanitary fixtures to increase productivity and sustainability. The facility department has switched to Chicago Faucets’s Hytronic touch system, which is a single model from using five tap types in all campus buildings.
Jeffery Phelps, the Supervisor of Sanctic Service Services, said that the decision is due to labor costs and logistics difficulties. “The first thing I did when I became a supervisor was to standardize all the taps on the campus forward,” he said.
Also read: After Newsom’s address: Trump can remove California schools from all grants and increase the war on the state police
The new tap system allows the department to maintain a limited inventory consisting of five units ready to build. Maintenance and changes are facilitated due to reduced component diversity. “Each brand requires its own spare parts, sometimes 40 different components, Phe Phelps said. Standardization reduced the repair time and minimized the deduction time.
Non -touch taps increased efficiency and water safetyTap care is included in the university’s annual building inspections. Clean the components of plumbing technicians, examine the ventians, and ensure that the mixing valves remain away from the wreckage. Batteries purchased from the store are used to replace the ongoing costs.
Phelps said that installation and service are simplified. Pre -installed hoses and over -deck access reduce the need for disassembly. “You’re taking a screw and everything is falling apart,” he said. Battery packages can also be easily accessed by removing a screw.
Cleaning is also easier for custody personnel. “There are not many cracks or spaces for them to rub,” Phelps said. “They use only one microfiber towel and wipe them.”
Labor and water use on campus decreased
Tap elevations allowed the facility department to maintain service levels despite the decrease in personnel. “New taps are very helpful to us because we are very short money,” Phelps said. Previously, manual two -handles taps required significant more time for maintenance.
Also read: USA: The pressure on diversity programs reshapes university graduation ceremonies
The new sensor taps also reduce the problems caused by Prato’s hard water. Calcium accumulation on solenoid screens is dissolved by rotating in cleaned solenoids. “We take it back to the shop to clean the dirty solenoid and prepare it for the next faucet,” he said.
To comply with the Assse 1070 boiling protection standards, the mixing valves are tested and adjusted to remain maximum below 105 ° F. “We transfer the water, we test the temperature and water is at the preferred temperature,” Phelps said.
Low -flow fixtures advance their sustainability and cost targets
Hytronic touching taps are part of the university’s strategy to meet Leed and Calgreen’s requirements. Each tap provides 0.35 gallons per minute at low flow rate. The automatic closing feature allows water to operate only when hands are detected.
The university established a faucet working with more than 300 sensors. The cost of each unit was approximately $ 800, but the cost is partially balanced with a grant of $ 1,000 to a student who examines the water saving benefits of untouchable luminaires. “So we bought two taps for someone’s price, Phe Phelps said.
According to Phelps, the new system has reduced failures with tap. Both of them are required only two reserves due to graffiti damage. “Your hands are running while the tap,” he said. “Water closes when they are removed.”
Also read: More than IQ 145, the SAT score 1580: Valedicorian’s son was rejected from Ivy League Colle.
Dominguez Hills, California State University, reduced operational costs by applying a standard sanitary installation system with sensor taps, increased labor productivity and met basic environmental targets based on sustainable infrastructure development.

